  
PROPAVE
A Division of Haviland Corporation
Professional Paving Tools
| Serrations |
Click Image to Enlarge
|
- 1/8 x 1/8 - 1/8" wide by 1/8" deep V notch - 5 to 15 mil. (estimated)
- 3/16 x 3/16 - 3/16" wide by 3/16" deep V notch - 15 to 25 mil. (estimated)
- 1/4 x 1/4 - 1/4" wide by 1/4" deep V notch - 25 to 35 mil. (estimated)
- 5/32 x 5/32 - 5/32" wide by 5/32" deep V notch - 30 to 40 mil. (estimated)
- 3/8 x 3/8 - 3/8" wide by 3/8" deep V notch - 35 to 45 mil. (estimated)
- 1/2 x 1/2 - 1/2" wide by 1/2" deep V notch - 45+ mil. (estimated)
Note: When ordering serrated squeegees use the item number followed by SE (serration) and the serration depth. ( i.e. 1424SE 1/8, 14 indicates type of rubber, 24 indicates the length, SE indicates serrated and 1/8 indicates serration depth and height.
|
| Frames and Fasteners |
Click Image to Enlarge
|
Frames have rounded ends for safety and shipping and are constructed of either;
- 14 gauge painted - straight,
- 14 gauge zinc-plated - curved, or
- 16 gauge zinc-plated steel.
Fasteners are zinc-plated steel, with nylon insert lock nuts (except Multi-Purpose Lines which feature wing nuts for quick blade change).
|
| 3003 Line |
Click Image to Enlarge
| Neoprene Sealer Squeegee
With a heavy-duty steel frame, zinc socket and a petroleum resistant 3"x5/16" neoprene rubber blade, this unit is made to last. The 3" blade allows for more pliancy. The unit can be flipped over for smoothing and light scraping. It is designed for asphalt and concrete sealing, large and small jobs. Rubber replacement blades are available. This squeegee is made exclusively for applying sealer.
| Length | Stock # | Refill Stock # |
| 18" | 3183N | 25183N |
| 24" | 3243N | 25243N |
| 30" | 3303N | 25303N |
| 36" | 3363N | 25363N |
| 48" | 3483N | 25483N |
|
| 3000NBE Line |
Click Image to Enlarge
| Neoprene Slanted Edge Squeegee
The slanted edge squeegee has the same high quality components as our 3003N line neoprene sealer squeegee (see above). The slanted edge provides for greater control when applying lighter viscosity sealing material. This squeegee is designed for application of petroleum based products and is available with 2.5" or 3" height blades. The blade is 1/4" thick.
| Length | Blade Height | Stock # | Refill Stock # |
| 18" | 2.5" | 3182.5NBE | N-18BER-2.5 |
| 24" | 2.5" | 3242.5NBE | N-24BER-2.5 |
| 30" | 2.5" | 3302.5NBE | N-30BER-2.5 |
| 36" | 2.5" | 3362.5NBE | N-36BER-2.5 |
| 48" | 2.5" | 3482.5NBE | N-48BER-2.5 |
| 18" | 3" | 3183NBE | N-18BER-3 |
| 24" | 3" | 3243NBE | N-24BER-3 |
| 30" | 3" | 3303NBE | N-30BER-3 |
| 36" | 3" | 3363NBE | N-36BER-3 |
| 48" | 3" | 3483NBE | N-48BER-3 |
|
| 3000GBE Line |
Click Image to Enlarge
| Tan Gum Slanted Edge Squeegee
Same high quality frame and socket as our 3000N line neoprene sealer squeegee (see above). The 1/4" thick tan gum blade allows for greater flexibility and is longer lasting than a neoprene blade. The slanted edge allows for greater control of sealer finish. This squeegee is designed for water-based or latex sealing material and is available in 2.5" or 3" height blades.
| Length | Blade Height | Stock # | Refill Stock # |
| 18" | 2.5" | 3182.5GBE | G-18BER-2.5 |
| 24" | 2.5" | 3242.5GBE | G-24BER-2.5 |
| 30" | 2.5" | 3302.5GBE | G-30BER-2.5 |
| 36" | 2.5" | 3362.5GBE | G-36BER-2.5 |
| 48" | 2.5" | 3482.5GBE | G-48BER-2.5 |
| 18" | 3" | 3183GBE | G-18BER-3 |
| 24" | 3" | 3243GBE | G-24BER-3 |
| 30" | 3" | 3303GBE | G-30BER-3 |
| 36" | 3" | 3363GBE | G-36BER-3 |
| 48" | 3" | 3483GBE | G-48BER-3 |
|
Click Image to Enlarge
| Aluminum Lute
Haviland's lute is manufactured with a 84 inch extruded aluminum handle and a 1-1/4" O.D., ridged for strength. The aluminum extruded blades teeth are one inch wide, one inch deep on one side and a straight edge on the other side which provides more versatility. An internally braced stamped steel socket adds strength to the handle providing for exceptional strength versus weight.
| Length | Stock # | Net Weight | Refill Stock # |
| 30" | 30L | 5 lbs. 5oz. | 30LR |
| 36" | 36L | 5 lbs. 6 oz. | 36LR |
| 42" | 42L | 6 lbs. | 42LR |
|
| 2300NSE Line |
Click Image to Enlarge
| Applicator Squeegee
The frame is a heavy 14 gauge with an aluminum handle socket and a long lasting petroleum resistant 2"x1/4" neoprene rubber blade. The serrated edge allows for more controlled material deposit. Pliancy of rubber blade allows flexibility of material thickness through pressure and angle applied. It is available with 1/8, 3/16, 1/4, 3/8, 1/2, or 5/32 inch serrations - please indicate depth when ordering, standard serration is 3/16". Refill blades are available.
| Length | Stock # | Refill Stock # |
| 16" | 2316NSE | 2516NSE |
| 18" | 2318NSE | 2518NSE |
| 24" | 2324NSE | 2524NSE |
| 30" | 2330NSE | 2530NSE |
| 36" | 2336NSE | 2536NSE |
|
| 1400SE Line |
Click Image to Enlarge
| E.P.D.M. Applicator Squeegee
The applicator squeegee is an efficient method to apply epoxy sealers and urethanes as it spreads pigment and grit uniformly. Pliancy of rubber blade allows flexibility of material thickness through pressure and angle applied. The E.P.D.M. is a stiffer blade which allows for the serration to stand up. Available with 1/8, 3/16, 1/4, 3/8, 1/2, or 5/32 inch serrations - please indicate depth when ordering, standard serration is 3/16". Refill blades are available.
| Length | Stock # | Refill Stock # |
| 16" | 1416SE | 1916SE |
| 18" | 1418SE | 1918SE |
| 24" | 1424SE | 1924SE |
| 30" | 1430SE | 1930SE |
| 36" | 1436SE | 1936SE |
|
| MPF Line |
Click Image to Enlarge
| Multi-Purpose Floor Squeegee
The aluminum channel frame allows for fast blade replacement. The dual edge blade provides a "BUILT-IN" refill and is non-marking petroleum resistant red neoprene rubber. The handle socket is stamped steel.
| Length | Stock # | Refill Stock # |
| 15" | MPF-15 | MPFR-15 |
| 18" | MPF-18 | MPFR-18 |
| 24" | MPF-24 | MPFR-24 |
| 30" | MPF-30 | MPFR-30 |
|
| MPL Line |
Click Image to Enlarge
| Multi-Purpose Lightweight Squeegee
This lightweight applicator and window squeegee is universal, it is durable enough to be used on floors. The dual edge blade provides "BUILT-IN" refill for a quick blade change. The channel and socket are aluminum.
| Length | Stock # | Refill Stock # |
| 10" | MPL-10 | MPLR-10 |
| 12" | MPL-12 | MPLR-12 |
| 16" | MPL-16 | MPLR-16 |
|
| MPFSE Line |
Click Image to Enlarge
| Serrated Applicator Squeegee
This squeegee is a lightweight and rugged epoxy applicator with an aluminum channel frame and stamped steel socket. No tools are required to replace the blade on this dual-edge squeegee. The blade has a "BUILT-IN" refill and is a non-marking gray E.P.D.M. rubber. It is available with 1/8, 3/16, or 1/4 inch serrations.
| Length | Stock # | Refill Stock # |
| 15" | MPFSE-15 | MPFSER-15 |
| 18" | MPFSE-18 | MPFSER-18 |
| 24" | MPFSE-24 | MPFSER-24 |
| 30" | MPFSE-30 | MPFSER-30 |
|
| MPC Line |
Click Image to Enlarge
| Multi-Purpose Curved Squeegee
This lightweight aluminum frame and steel stamped socket is constructed to control large volumes of liquids. It is efficient, rugged and manufactured with non-marking red neoprene rubber.
| Length | Stock # |
| 24" | MPC-24 |
| 30" | MPC-30 |
|
| SS Line |
Click Image to Enlarge
| Heavy-Duty Floor Scraper
With an eight inch full-hard stainless steel blade and heavy-duty zinc handle socket, this floor scraper is tough enough to withstand years of use. With angle of use, the blade will constantly sharpen itself. This heavy-duty floor scraper is also available with an injection molded, threaded polycarbonate socket. (Not designed to be used as a "chipper.")
| Stock # | SS-8 (zinc socket) |
| SS-8 PCT-97 (polycarbonate socket) |
|
| FEC and FECSE Line |
Click Image to Enlarge
| Multi-Use Squeegee "Edger"
This squeegee is great for hard to reach areas yet lightweight and rugged. Threaded high strength socket fits most threaded broom and extension handles. The Multi-Use Squeegee is available in red, blue, green, yellow, white, and brown and can be serrated in 1/8 or 3/16 inch serrations. Please indicate depth of serration when ordering. Standard serration is 3/16".
| Length | Stock # | Serration Stock # |
| 12" | FEC-12 | FECSE-12 |
| 15" | FEC-15 | FECSE-15 |
| 18" | FEC-18 | FECSE-18 |
| 24" | FEC-24 | FECSE-24 |
|
| EC Line |
Click Image to Enlarge
| Multi-Use Hand-Held Squeegee
This squeegee is great for hard to reach areas yet lightweight and rugged. It is available in red, blue, green, yellow, white, and brown. (Other specialty sizes are available.)
| Length | Stock # |
| 6" | EC-6 |
| 8" | EC-8 |
| 10" | EC-10 |
| 12" | EC-12 |
| 14" | EC-14 |
| 16" | EC-16 |
| 18" | EC-18 |
|
| 1700 and 1700SE Line |
Click Image to Enlarge
| Wood Squeegees
This squeegee features a lightweight wood frame and a petroleum resistant 3/16" neoprene rubber blade. It is available with a straight or serrated edge and is an inexpensive applicator, but better quality than a "throw-away" unit. Available with 1/8, 3/16, or 1/4 inch serrations - please indicate depth when ordering, standard serration is 3/16".
| Length | Stock # | Serrated Stock # |
| 18" | 1718 | 1718SE |
| 24" | 1724 | 1724SE |
| 30" | 1730 | 1730SE |
|
| Pouring Pot |
Click Image to Enlarge
|
The PP-2 is a two gallon pouring pot with three interchangeable nozzle sizes; 3/4", 9/16", and 11/16" and a drip proof design. It is designed to unassemble easily without tools to provide complete internal inspection and ease of cleaning. Painted safety orange this heavy duty steel frame is built to outlast standard pouring pots.
|
| Hand Tamper |
Click Image to Enlarge
|
Haviland's hand tamper is a 8" x 8" x 1/4" steel plate with 3/16" steel gussets and 48" x 1-1/4" O.D. steel pipe handle. It won't crack like cast iron and aluminum units and weights 13 lbs. The tamper is welded into one piece to provide for a stronger unit and less chances of breaking.
|
| Heavy Duty U-Shaped Crackfiller Squeegee |
Click Image to Enlarge
|
Built for durability our heavy-duty crackfiller is manufactured with a safety orange painted steel frame and with 5/16" x 2" long lasting neoprene rubber blade. This crackfiller can be used with hot or cold applications. The 9-1/2" deep U-shaped cavity holds plenty of material. Rubber refill blades are available. Hot-belted material is available.
| Stock # | Refill # |
| HSU-1 | HSU-1R |
|
| Lightweight U-Shaped Crackfiller Squeegee |
Click Image to Enlarge
|
The BK-1 is an inexpensive but effective model of the HSU-1and is lighweight and easy to use. The steel frame is painted safety orange and the 3/16 x 1-1/4 neoprene rubber blade can be used with hot or cold applications. The U-shaped cavity is 4-1/2 inches deep. Rubber refill blades are available.
| Stock # | Refill # |
| BK-1 | BK-1R |
|
| Push/Pull V-Shaped Crackfiller Squeegee |
Click Image to Enlarge
|
Designed to work as a push or pull squeegee by simply reversing the socket the V-shaped crackfiller squeegee is an excellent choice. No tools required to switch from a push to a pull unit. The "V" is at a 70 degree angle using 1/4x2-inch neoprene rubber. The 2-inch blade height adds greater control of material while the long lasting neoprene rubber blade can be used on hot or cold applications.
| Stock # | Refill # |
| HSV-9 | HSV-9R |
|
| PROPAVE MASTER DISTRIBUTORS |
Northeast PROPAVE
800-3PROPAVE (800-377-6728) |
573.897.3672 voice - 573.897.4497 fax
800.325.3915
{ Company Info }
{ Sales Reps }
{ Request Info }
{ Credit Application }
{ In The Spotlight }
{ Floor Squeegees }
{ Window Squeegees }
{ Floor Machine Replacement Parts }
{ Paving Tools }
{ Specialty Products }
{ Links }
{ Home }
Copyright © 1999-2004 by Haviland Corporation - ALL
RIGHTS RESERVED.
Hosted by PrimeLink
Design by 4 Sight Design
 |
;)
;)
;)
;)
;)
;)
;)
;){kind=small}
;)
;)
;)
;)
;)
;)
;)
;)
;)
;){kind=small}
;)
;)
;)